Go to the Apple menu and open System Preferences. Why Is My Right Click Not Working On Mac? On some MacBooks, you can click and hold the picture to prompt the pop-up window to appear. You have to hold down Control for the entire duration of the click, or the menu won’t appear. A pop-up menu should appear on or near the image. Check the cabling and try again.Hold down the Control key, click the image, and then release the Control key. If the IP Address is "0.0.0.0 (Didn't obtain)" it indicates a problem with the connection between your printer and your local network router or switch. The second label printed should resemble the image below (though the actual numbers will vary) and the IP ADDRESS should be labeled under IP PROTOCOL. The last label printed will be titled "Network Configuration" Once the printer is in the ready state (Status indicator is solid green), press and hold the FEED and CANCEL buttons for two seconds and release. On your Zebra printer, you will need to print a network configuration report.įlip the power switch on the side of the printer on Once the printer is plugged in, we will want to do a test to make sure it has a valid IP address to verify it is viewable to your network. It does not matter if your computer connects to the network via ethernet or wifi as long as all devices are on the same subnetwork. Locate your internet router and plug your Zebra ZD printer into an available ethernet port. If you're using an iPad connect is already installed within the iOS App so just make sure to download it from the App Store here! Step 1: Connect your printer to the router For download and installation instructions, click here. In order for Heartland Retail to interface with printers, you'll need to have Heartland Retail Connect installed and running on your computer. Please note, this printer will not be visible in System Preferences > Printers and Scanners and will not be available to other programs.īefore you begin. It should also apply to earlier models of Zebra desktop label printer, such as the LP2824 Plus. This guide covers setup and installation of the Zebra ZD410 LAN series of label printer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |